Best Selling Products

AirdOut Cursive 5" Die-Cut Decal

**All decals must be applied on smooth, dry surfaces and in temperatures of 50F+ degrees. Please clean surface thoroughly before applying. We will not be responsible for incorrect installation of decal.**

AirdOut Cursive License Plate Frames, by AirdOut.

The License Plate frames come in Black plastic with bright chrome lettering.

Frames sold individually.

Fits standard United States license plates (6" x 12"). Will not fit JDM and UK plates.

• Deluxe 30's Soft style yarns
• 100% Cotton Jersey
• Rolled forward shoulders for better fit
• Double needle sleeve and bottom hems

**Please note: This item is 100% Cotton and may shrink in the dryer, we suggest washing cold and hang drying, or ordering 1 size larger**

Mens Sizing:

Womens Sizing:

Race Car Fuse/ Relay Panel Block 8 Way Hot Rod . Condition is New. Will consist of 8 Relays for 8 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x12 inches

Comes with Fuses.

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture had detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

Race Car Fuse/ Relay Panel Block 12 Way Hot Rod . Condition is New. Will consist of 12 Relays for 12 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x 12 inches

Comes with Fuses.

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture had detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

Race Car Fuse/ Relay Panel Block 8 Way Hot Rod . Condition is New. Will consist of 8 Relays for 8 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Comes with 6 or 8 Switch Panel! Pre-wired. (Wire positive and ground to switches, then from switch to wire wire on the panel.) Panel is aluminum.

Red, Green or Blue Switches. Please let me know which color you want when purchasing!

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x 12 inches

Comes with Fuses.

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture had detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Questions please ask, can walk you through it!

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

AirdOut Reverse Box 6.5" Die-Cut Decal

**All decals must be applied on smooth, dry surfaces and in temperatures of 50F+ degrees. Please clean surface thoroughly before applying. We will not be responsible for incorrect installation of decal.**

"Bagged" Box Sticker

Measures: 8" Wide by 2" Tall

Race Car Fuse/ Relay Panel Block 12 Way Hot Rod . Condition is New. Will consist of 12 Relays for 12 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Comes with 6 or 8 Switch Panel! Pre-wired. (Wire positive and ground to switches, then from switch to wire wire on the panel.) Panel is aluminum.

Red, Green or Blue Switches. Please let me know which color you want when purchasing!

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x 12 inches

Comes with Fuses.

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture had detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Questions please ask, can walk you through it!

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

Race Car Fuse/ Relay Panel Block 6 Way -  COMPACT Hot Rod . Condition is New. Will consist of 6 Relays for 6 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x 6.5 inches

Comes with Fuses.

OPTIONS

Switches: Come pre-wired, wire ignition power and ground, then from switches to panel. Aluminum switch panel. 3 color options for lights. Your choice of Blue, Green, or red lights.

Added Wiring: Option to add 200ft of wiring (8 Colors-25ft each) or no additional wire.

Wiring in panel to your application:

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture had detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

AirdOut 6" Die-Cut Decal

**All decals must be applied on smooth, dry surfaces and in temperatures of 50F+ degrees. Please clean surface thoroughly before applying. We will not be responsible for incorrect installation of decal.**

200A Relay and 2 Flasher Relay Board

Same one as see in my Youtube Video.

Race Car Fuse/ Relay Panel Block 6 Way Hot Rod . Condition is New. Will consist of 6 Relays for 6 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. All have separate fuses and indicator light if fuse is blown. Same panel I currently run in my race car! 

Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.

Panel Measures 12 x 9 inches

Comes with Fuses.

OPTIONS

Switches: Come pre-wired, wire ignition power and ground, then from switches to panel. Aluminum switch panel. 3 color options for lights. Your choice of Blue, Green, or red lights.

Added Wiring: Option to add 200ft of wiring (8 Colors-25ft each) or no additional wire.

Wiring in panel to your application:

All you need to do is run power and ground to the Panel. Then wire from switch to WHITE wire block. Then wire out from the same position on the YELLOW wire block to your accessory.

Last Picture has detail on how to wire in.

 *Please when wiring in the panel, pay attention to which terminal you connect the circuit to, the same circuit from one side to the other is not the same location. Trace the wire from one side through the relay to the other side. This is done to make the panel look uniform, once all circuit are used everything will look uniform and neat!*

Questions please ask, can walk you through it! (Use Instagram for fast response)

Please allow 3-4 days build time!

*Disclaimer: Offroad Use only, not responsible for your wiring.*

• Deluxe 30's Soft style yarns
• 100% Cotton Jersey
• Rolled forward shoulders for better fit
• Double needle sleeve and bottom hems

**Please note: This item is 100% Cotton and may shrink in the dryer, we suggest washing cold and hang drying, or ordering 1 size larger**

Mens Sizing:

Womens Sizing:

• Deluxe 30's Soft style yarns
• 100% Cotton Jersey
• Rolled forward shoulders for better fit
• Double needle sleeve and bottom hems

**Please note: This item is 100% Cotton and may shrink in the dryer, we suggest washing cold and hang drying, or ordering 1 size larger**

Mens Sizing:

Womens Sizing: